| |
You are in Turning
/ Turning Geometries
|
|
|
Turning Geometries |
|
|
|
|
|
Stellram
offers the following geometries for turning. |
|
|
|
|
|
Negative
Geometries 
|
|
|
|
|
|
Geometry
1A |
|
|
|
 1A
- Fine Finishing:
Excellent chip control at low depth of cut and feed rates.
Geometry for reduced built-up edge during finish machining
with good chip control and small chip section.
|
|
|
|
|
|
Geometry
2B |
|
|
 2B
- Finishing:
Positive cutting action for very light depths of cut and feeds.
Positive rake provides lower cutting pressures allowing increased
tool life. |
|
|
|
|
|
Geometry
2N |
|
|
 2N
- Light to Medium Roughing:
Positive rake angle provides a positive cutting action and reduced
cutting pressure, this makes 2N a good starting geometry for
a wide range of application / materials. |
|
|
|
|
|
Geometry
3F |
|
|
|
 3F
- Finishing to Light Roughing:
3F geometry has periphery ground edges to maintain accurate
profiles and insert indexabillty. A sharp edge treatment
reduces built-up edge and improves surface finishes. |
|
|
|
|
|
Geometry
3G |
|
|
 3G
- Medium Finishing to Light Roughing:
Versatile all purpose geometry, used with light depths of cuts
and feed rates for trouble free machining. |
|
|
|
|
|
Geometry
3J |
|
|
|
 3J
- Medium Finishing to Light Roughing:
The smooth cutting action of 3J reduces cutting forces, improves
surface finishes and increases tool life.
|
|
|
|
|
|
Geometry 3M |
|
|
 3M
- Semi-finishing
to Light Roughing: All purchase geometry suitable for precision forged and cast
components, offering excellent chip control at varying depths of
cut. |
|
|
|
|
|
Geometry
4M |
|
|
 4M
- Medium to Heavy Roughing:
Single sided inserts for stability and strength with a soft
cutting action, which allows for high feed rates. |
|
|
|
|
|
Geometry
4T |
|
|
 4T
- General Purpose Roughing:
New designed version of 4T with improved surface contact, a
good all round negative roughing geometry for a wide range of
application. |
|
|
|
|
|
Geometry
4U |
|
|
 4U
- Medium and Roughing: This is a new geometry especially for Grey Cast Irons and Spheroidal
Irons, it has excellent wear and deformation resistance. |
|
|
|
|
|
Geometry
5V |
|
|
 5V
- Heavy Roughing:
Negative cutting action with extra edge support for superb
roughing performance with very heavy feeds and depth’s of
cut.
|
|
|
|
|
|
Positive
Geometries
|
|
|
|
|
|
Geometry
15 |
|
|
Sharp edge ground geometry for finish machining at light depth
of cut and feeds, this geometry also helps in reduce vibration.
|
|
|
|
|
|
Geometry
61 |
|
|
A
sintered insert with press in chipbreaker provides good chip
control and surface finish. |
|
|
|
|
|
Geometry
62 |
|
|
A periphery ground edges, geometry with optimized chipbreaker
for close tolerances and surface finishes. |
|
|
|
|
|
Geometry
64 |
|
|
A highly positive geometry, periphery ground with polished top
rake for the excellent removal of material. |
|
|
|
|
|
Geometry
66 |
|
|
A periphery ground geometry with press in chipbreaker and sharp
cutting edge, ideally suited to fine chip control. |
|
|
|
|
|
Geometry
73 |
|
|
Sintered geometry, which covers a wide range of application
and materials, ideal starter geometry for most application.
|
|
|
|
|
|
Geometry 91
|
|
|
 For finishing to medium applications under stable conditions. Open, positive geometry produces excellent chips and low cutting forces in titanium-based alloys. Low feeds are possible.
|
|
|
|
|
|
Geometry
3G |
|
|
Versatile all purpose geometry, used with light depths of cuts
and feed rates for trouble free machining. |
|
|
|
|
|
Geometry 4E |
|
|
 A
new geometry specifically designed to meet the demands of
machining aerospace type components manufactured from High
Nickel, High Cobalt and Titanium-based alloys. |
|
|
|
|
|
Geometry
M |
|
|
A sintered insert with press mini chipbreaker and ground chip
groove in nose radius, has a soft cutting action and good chip
control. |
|
|
|
|
|
Geometry
T |
|
|
A utility geometry for a variety of cutting operations where
the T style insert are required, gives a stable cutting action
in demanding conditions. |
|
|
|
|
|
Geometry
W |
|
|
Flat top inserts for general purpose machining available in
sharp edge and honed edge condition, making this geometry suitable
for materials from non- ferrous to cast iron. |
|
|
|
|
|
Geometry
X |
|
|
Precision ground parallel chip groove, available with a fully
ground periphery or as pressed, also with sharp or honed edge
condition, which enables this geometry to cut a variety of
materials in vibration sensitive operations.
|
|
|
|
|
|
1st Choice product solutions. Improve your productivity by selecting
the material for your application. |
|
|
|
|
|
|
|
|
|
|
|
Back to the Top |
|
|
|
|
Swiss
Automatic/
Posimatic
